Where it was born
Built in a festival booth, for festival booths.
This product exists because a vendor ran out of table, not because a factory had spare capacity. Everything about it is a response to a problem you have already had.
- ~600bracelets on one stand
- 1.24sq ft of table used
- ~4.8sq ft handed back to you
- <10 minto assemble
You are not short of inventory. You are short of table.
The pattern is always the same. You pack enough stock to make the booth fee worth paying, you start setting up, and somewhere around the third stand you realize the table is full and half the bins are still in the van. Whatever does not fit goes underneath the tablecloth, where it sells nothing and you carry it home again.
The usual answer is another 3-tier stand. Each one buys you about 90 more bracelets and costs you another 1.2 square feet — of the one resource in a 10×10 that no vendor can buy more of on the day.
A 10-tier display holds about 600 pieces on the same 1.24 square feet. That is not a marginal gain. It is the difference between a booth that looks like a clearance table and a booth that looks like a brand.
Why this one
What makes it the right fixture here
It survives the van
Solid pine, not acrylic and not particleboard. Acrylic looks sharp in photos and arrives at its fourth show chipped at every corner. This gets packed, unpacked and knocked forty weekends a year.
Bars lift out, so you load in your lap
All ten bars are removable. You load them sitting down at the hotel the night before, then drop them into place in about a minute — instead of threading bracelets over a fixed frame at 6am in the wind.
The drawer holds everything the table should not
Card reader, tags, tape, change float, phone. It came directly from working trade shows, and it doubles as the weight that keeps a 43-inch display steady when someone leans on your table.
It reads from the aisle
Stock lying flat is read one piece at a time by people who already stopped. Stock at eye level is read as a collection by people still walking, which is the half of the problem that is actually hard.
Under ten minutes, one screwdriver
It flat-packs to one carton per unit. Setup is not a two-person job and does not need tools you would have to remember to bring.
Ordering more than one
At quantity, we build around you.
Most vendors start with one and come back for a second in a different finish, so two units drop to $268.88 each and three to $238.88 — $150 off. There is also a full set — all four displays, one of every finish — at $208.88 each, where the fourth display works out at $118.88. If you run several markets at once, or a crew of booths, talk to us before you order five or more — that opens a trade account with volume pricing and consolidated freight, and past fifty units we will build to your spec: more levels, fewer levels, no drawer, your own etched panels.
Published pricing
One display
$288.88 each
List price
$288.88 total
Free US shipping, no account needed.
Two displays
$268.88 each
Save $40
$537.76 total
Two finishes, or one for the booth and one for the store.
Three displays
$238.88 each
Save $150
$716.64 total
The one most people should take — $150 off, any three finishes.
Full set — 4 displays
$208.88 each
Save $320
$835.52 total
All four displays, one of every finish — light, dark, white and black.
5 or more
Trade pricing
By quote
Opens a trade account with volume pricing, consolidated freight and net terms after the first order.
See wholesale →
Prices are per display and include free shipping anywhere in the continental United States. Quantity pricing applies to a single order.
Questions from craft fair & festival vendors
- What is the best bracelet display for a craft fair?
- One that adds capacity vertically rather than horizontally, because table area is the scarce resource in a booth and inventory is not. A multi-tier display holding several hundred pieces in roughly a square foot does the work of five small stands without spreading across the table you also need for wrapping and payment.
- How many bracelets should I bring to a craft show?
- Bring what you can display well rather than what fits in the van. Stock in bins under the table sells nothing. A realistic weekend range is 400 to 600 pieces, which is one 10-tier display or roughly six 3-tier stands.
- Will this fit on a standard vendor table?
- Yes. The base is 18.19 by 9.85 inches and it stands 43.5 inches tall, so it sits comfortably on a standard 6-foot table with room either side and does not overhang the front edge.
- Is a tall display stable at an outdoor market?
- The weighted base drawer keeps the center of gravity low and the base is nearly ten inches deep. Load the lower bars first, which is what most people do anyway. In genuine wind, no tall display of any kind should be left unsecured.
- How long does setup take?
- Under ten minutes with a household screwdriver, and far less if you keep it assembled between shows. Because the bars lift out, most vendors load bars at home and drop them in on site.
Other people who use it
Jewelry Stores & Boutiques
A self-serve range that earns its square footage.
Gift, Resort & Souvenir Shops
High-turnover impulse stock, restocked without closing the aisle.
Bead, Gem & Rock Shops
Deep, variant-heavy inventory that has to be comparable at a glance.
Surf, Skate & Coastal Retail
Accessory walls that hold a season without looking picked over.
Home & Personal Collections
A few hundred bracelets, visible and untangled, in a square foot.
10 tiers. 600 bracelets. 1.24 sq ft.
$288.88 with free US shipping, in four finishes — and less per unit the more you take.